Tin-Zinc and Other Glenair Material Innovations

Glenair rugged VG series VG95234, VG95328, and VG96929 with Tin-Zinc J Class plating are now qualified by The Federal Office of Bundeswehr Equipment, Information Technology and In-Service Support. Tin-Zinc is a RoHS cadmium-free galvanic finish that offers high conductivity and shielding performance, corrosion resistance, and proven compatibility with legacy Cadmium, Zinc-Nickel, and Nickel-PTFE finishes. VG-Qualified J-Class Tin-Zinc Plated Connectors VG95234 · VG95328 · VG96929

„ High conductivity and shielding performance in harsh environment conditions „ High corrosion resistance „ Compatibility with legacy cadmium- plated connectors and environmental shrink boots „ RoHS-compliant material „ Test reports available upon request

High conductivity and shielding performance:

VG95234 Code J Tin-Zinc plating shield connection average value: 0.5 mohm (VG95234 with legacy Cadmium plating shield connection average value: 1.5 mohm) Durability (500 mating cycles) + dry heat (16 hours at 125°C) + cold (16 hours at -55°C) + humidity (672 hours at 40°C 93%) Cycling Salt spray (5 days 2hrs salt spray + 22 hours humidity) Tested with the following environmental heat shrink boots: VG95343T06 (without inner coating) VG95343T18 (with inner coating)

High conductivity and shielding performance

Shielding performance not degraded after:

Compatibility with heat shrink boots of Cadmium plated connectors:

VG95343T28 (without inner coating, halogen free) VG95343T29 (with inner coating, halogen free) Tin-Zinc is a Cadmium-free RoHS material

Available finishes: Standard Cadmium Code B Marine Bronze Code J Qualified Tin-Zinc

RoHS Compliance

High Corrosion Resistance

Tested up to 2000 hrs. of salt spray

QwikConnect • April 2023

28

Powered by