Wiring Instructions for IT - FRIT (MIL-DTL-C-5015G) and ITB - ITS - FRITS (VG95234) Connectors
IT - FRIT Series - Receptacle Connector Connector Description
BACKSHELL INTERNAL O-R FLANGE
GROMMET COMPRESSION RING INSERT CONTACTS
Receptacle Connector
Items
Description
Flange
Metallic container for the insulating insert.
Made of insulating material it divides the contacts one from the other while holding them. It is supplied already mounted in the shell.
Insert
They are the transmission ways of the signals arriving from the cable. They are available both in crimp and solder versions. In the solder version they are mounted in the insert, in the crimp version they are supplied separately. It protects the ending side of the wired contacts and guarantees the water tightness of the single conductors after the closing of the backshell, but only if their dimensions are the ones required.
Contacts
Grommet
It compresses the grommet on the wiring cables during the screwing of the backshell.
Compression Ring
Metallic container. It protects the ending side of the cable and allows to accept each kind of cable clamp thanks to the threaded back side.
Backshell
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Wiring Instructions Dimensions in Inches (millimeters) are subject to change without notice.
5
Powered by FlippingBook