M I S S I O N - D R I V E N D E S I G N
G lenair Series 806 environmental filter connectors are built in-house for use in EMC management of electronic systems and interconnect cabling. Series 806 filter connectors are built IAW applicable series specifications, and are designed to mate with 806 plugs with the same insert configuration and opposite contact gender. Ceramic planar filter arrays are supplied in C and Pi capacitance configurations. Jam-nut and square-flange panel mounting with PC tail teminals, fully potted for environmental protection in high-vibration and high-altitude applications, as well as temperature ranges from -55°C to +125°C. Size 22HD, 20HD contact arrangements and hybrid arrangements with size #16 and size #12 contacts for combined power / signal applications. Board mounting flange has threaded standoffs and orientation post. Environmental EMI/RFI Filter Series
Planar, multilayer ceramic capacitive filters C, Pi, L-C, and C-L electrical configurations PC tail or solder cup wire termination 35 – 56,000 pF capacitance High-density #20HD and #22HD arrangements for reduced size and weight plus size #16, #12, #8 standard and hybrid layouts Operating temperature: -55°C to +125°C Dielectric withstanding voltage: 300 VDC Turnkey in-house manufacturing of all filter connector elements
FILTERED SERIES 806 CONNECTOR CONFIGURATIONS AND DETAILS
O-ring
Band-Master ATS Nano Band termination platform
Red Band Full Mate Indicator
Red Band Full Mate Indicator
O-ring
Jam Nut
Jam Nut Receptacle, Solder Cup Contacts
Jam Nut Receptacle, PCB Contacts
Jam Nut Receptacle, Threaded Standoff, PCB Contacts
QwikConnect • January 2022
28
Powered by FlippingBook