Deep Dive: Glenair Subsea Interconnect Technologies

SERIES 70 HIGH-PRESSURE 10K PSI / 700 BAR / 7000 M SeaKing high-density subsea connectors and cable assemblies PBOF cable attachment accessories

REVOLUTIONARY PBOF SWIVEL HOSE ATTACHMENT ACCESSORIES Hose barb fittings for PBOF cable assemblies are the perennial weak link in subsea oil & gas applications. Kinked and twisted hoses, leaky fittings, corroded hose clamps, and general poor performance characterize most existing solutions. The Glenair PBOF swivel hose attachment for SeaKing connectors solves these problems and more. Designed from the sea floor up to perform flawlessly and reliably, this revolutionary attachment puts an end to the long list of field maintenance problems associated with oil-filled cable applications. Straight, 45°, and 90° “full radius” angle and profile hose routing Hose angle adjustment feature eliminates risk of oil leakage Corrosion-resistant materials used throughout Threaded couplers with safety set-screws for fail-safe leak and decoupling protection—no special tools required for assembly Compact PBOF compression fitting with 340° hose swivel action Support for the broad range of hose diameters and wall thicknesses

interlocking teeth

Interlocking teeth on SeaKing plug connectors interface with corresponding teeth on the PBOF swivel hose attachment to facilitate easy indexing and routing of hose assemblies

Elastomer Tubing

hose barb swivel attachment

Optional Fill Port

Revolutionary swivel hose barb compression attachment eliminates twisting and damage in PBOF assemblies

S Straight

M 45°

The complete range of SeaKing PBOF hose compression fittings includes straight, 45°, and 90° full radius profile versions; with and without integrated oil fill ports

N 90°

SeaKing Performance Specifications

threaded couplings

Pressure Rating Plug: 10,000 psi, mated condition

per ISO 13628-6

Receptacles: 10,000 psi mated and open face 600 V typical 5 GOhm insulation resistance at 500 VDC

Electrical

per MIL-STD-202, Method 301 per MIL-STD-202, Method 302 MIL-STD-202, Method 101 MIL-STD-202, Method 103 ISO 13628-6

Threaded PBOF compression nut and connector coupling nut (with additional safety set screw) provide for fast and easy assembly and prevent leaks and assembly decoupling

Materials

Salt Spray (corrosion) Humidity (steady state) Thermal Cycle 30G Mechanical Shock

Shock

per ISO 13628-6 per ISO 13628-6

Vibration

5G Vibration